XADO 42015 Atomic Metal Conditioner Maximum SUV with 1 Stage Revitalizant 360ml

Atomic Metal Conditioner Maximum SUV with 1 Stage Revitalizant is a 3-component product of a new generation specially formulated for anti-wear engine treatment in SUV’s, Light Trucks, Buses with oil system capacity up to 10 L. Due to Revitalizant the product reduces friction, rebuilds worn metal in engine parts and creates protective coating against future wear, thus providing tools-free restoration and anti-wear protection. Product application prolongs the life of your engine and allows avoiding expensive repairs in the future. One treatment lasts for 60,000 miles!
Application
The temperature of the compound before application should not be lower than 77 °F. Shake the bottle. Introduce the compound into the oil filler neck of the engine, warmed up to the operating temperature. Start the engine and provide its idle operation for 3–5 minutes. Revitalization takes place during 600–900 miles of run.

1 bottle (360 ml) of Atomic Metal Conditioner Maximum SUV with 1 Stage Revitalizant is enough for the engine with the oil system capacity of up to 10 L. Oil level should not exceed the maximal level of dipstick. Avoid overdosing.

Granules of Revitalizant completely dissolve in motor oil at normal operating temperature.

Note:
It takes 600 to 900 miles to complete the Revitalization cycle, during which changing oil is NOT recommended
Granules of atomic Revitalizant are completely dissolved in motor oil under operating temperature
Repeated application of Atomic Metal Conditioner Maximum SUV is recommended after 60,000 miles
For the highest level of protection for your vehicle’s engine use XADO Atomic Oil or Atomic Metal Conditioner Tuning during each oil change in the future
Compatible with all types of motor oils
Technology and certificates
3C EFFECT 3G generation 100 000 re-treatment interval
Restores parts’ surfaces and compensates current wear
Levels and increases compression in cylinders
Increases pressure in oil system up to the nominal level
Creates active protection system for parts against overloading and overheating
Reduces noise and vibration level
Improves oil lubricating properties and tribological characteristics of engine assemblies
Increases service life of an engine
Reduces fuel consumption
Increases engine power and acceleration capability
One treatment lasts for 60,000 miles of run